Featheredge Panels & Arris Rails

A range of Featheredge treated board, arris rails and cant rails to complete a run of featheredge fencing, available to order online and in branch. For installing Featheredge Fencing we recommend as follows; No fewer than 12no. 100mm wide feather-edge boards shall be provided per metre. They shall... Read More

A range of Featheredge treated board, arris rails and cant rails to complete a run of featheredge fencing, available to order online and in branch.

For installing Featheredge Fencing we recommend as follows;
No fewer than 12no. 100mm wide feather-edge boards shall be provided per metre. They shall be lapped by approximately 18mm. They shall rest on top of the gravel board, if any, and be nailed to each main rail with 50 x 2.65mm nails. They should be nailed to the counter rail, if any, with 40mm x 2.65mm nails if the counter rail is of 65 x 25mm section, or with 50 x 2.65mm nails if the counter rail is of 50 x 32mm section. Each nail shall pierce only the featheredged board. The tops of the feather-edged shall be aligned. Where gravel boards are not fitted, there shall be clearance between the bottom of the feather-edged boards and the general ground level.

Note: For 150mm wide feather edge boards no fewer than 8no. boards are required per metre.